1. Regarding indoor distribution antennas and components, which of the following statement is wrong?

2. Which of the following is not included in the survey station preparation information?

3. Assuming other conditions are unchanged, if the power parameter PB is changed from 0 to 1, then which of the following statements is correct?

4. Which of the following information can be observed directly through the Probe drive test tool? (multiple choice)

5. For the following LTE neighborhood planning, which description is correct? (multiple choice)

6. If the cell radius is 90 kilometers, which of the following should be used for the PRACH preamble format?

7. Under the same coverage requirements, for the comparison between the adoption of f-band network and the adoption of d-band network, the number of stations required is;

8. For the same-frequency switching scenario, which of the following parameters has little effect on the handover?

9. LTE can obtain various interface signaling through LMT, M2000, and drive test tools.

10. RSRP reference signal received power refers to the average signal power received by all REs of a Symbo bearer Reference Signa within the measured frequency bandwidth.

11. LTE power control does not affect the coverage and capacity of the system.

12. Which of the following events is the basis for LTE synchronous frequency switching?

13. Which of the following format files can the Log file be converted to? (multiple choice)

14. The single-station verification test only needs to verify whether the cell status in the idle mode is normal.

15. In large, medium and small cities, many streets have tall buildings on both sides. In order to avoid time dispersion, the cell antenna azimuth of nearby base station cannot be installed on the street.

16. Regarding the over-zone, overlapping coverage control, which of the following statements is wrong?

17. Which of the following channel or signal is used to cell PCI identification and cell search process?

18. Regarding TA planning, which of the following statements is incorrect?

19. About the inter-frequency handoff based on the coverage, receive which of the following event will start GAP (inter-frequency) measurements?

20. If the UE fails to switch, it is mostly characterized by dropped calls, RRC reestablishment, and so on.