Actual HCIE-Routing & Switching (Written) V3.0 H12-261_V3.0-ENU Exam Questions

Are you planning to take H12-261_V3.0-ENU HCIE-Routing & Switching (Written) V3.0 certification exam? Do you want to take and pass H12-261_V3.0-ENU exam in the first attempt? If you want to get actual Huawei H12-261_V3.0-ENU exam questions online, the most actual HCIE-Routing & Switching (Written) V3.0 exam questions H12-261_V3.0-ENU preparation materials have been released online.

Actual H12-261_V3.0-ENU exam questions have been released recently, which would be the latest exam materials to help you prepare for HCIE-Routing & Switching (Written) V3.0 certification exam. Here we will share 25 free demo questions online, which will help you check the high quality of HCIE-Routing & Switching (Written) V3.0 H12-261_V3.0-ENU exam questions. Any other questions, please contact us via mail: [email protected].

Begin to Test:

1. What is the command to configure VRRP preemption delay?

vrrp vrid 1 preempt-mode timer delay 20

vrrp vrid 1 preempt-delay 20

vrrp vrid 1 preempt-timer 20

vrrp vrid 1 timer delay 20

Question 1 of 25

2. It is necessary to elect a DR between multicast routers running PIM-SM to be responsible for sending and receiving multicast data at the source or member side. Which one of the following descriptions of the DR election rules is correct?

The PIM router with the long interface mask is elected as the DR.

Compare the DR priority first; if the priority is the same, you need to compare the interface IP addresses of the PIM routers to elect the DR.

The PIM router with a small IP address is elected as the DR.

The PIM router with the lower DR priority value is elected as the DR.

Question 2 of 25

3. In an MPLS VPN network, when a data packet enters the public and is forwarded, it will be encapsulated with two layers of MPLS labels. Which of the following options describes the processing procedure of the data packet correctly? (Multiple Choice)

The outer label of the packet received by the penultimate hop device is 3

The Egress PE device receives untagged IP packets

The Egress PE device correctly sends the data packet to the corresponding VPN according to the inner label

The packet is forwarded to the Egress PE device after the outer label pops up on the penultimate hop device

Question 3 of 25

4. The correct description in the following of BGP loop protection is: (Multiple Choice)

Any routing information from IBGP peers will be advertised to other IBGP peers

Through the AS-PATH attribute, discard any update information received from EBGP peers that contains its own AS number in the AS-PATH attribute

Non-RR BGP routers will not announce any update information from IBGP peers to other IBGP peers

DBGP routers will not announce any updates from EBGP peers to their EBGP peers

Question 4 of 25

5. In the OSPF broadcast network, there are 4 routers RTA, RTB, RTC, and RTD in the same network segment. The DR priorities are 2, 1, 1, and 0 respectively, and the router IDs are 192.168.1.1 and 192.168.2.1, 192.168.3.1 and 1924.1 respectively.
If the OSPF protocol is enabled on the 4 routers at the same time, the BDR selected by OSPF is _____.

RTB

RTC

RTD

RTA

Question 5 of 25

6. Regarding the stub area and NSSA area of the OSPF protocol, which of the following statements are wrong?

Type4 LSA is not allowed to be injected into both stub areas and NSSA areas

Type5 LSA is not allowed to be injected in the stub area, but it is allowed to be injected in the NSSA area

Type7 LSA is not allowed to be injected in the stub area, but it is allowed to be injected in the NSSA area

Type3 LSA injection is allowed to be injected in both stub area and NSSA area

Question 6 of 25

7. If the Sticky MAC function of the interface is enabled, what is the number of MAC addresses learned by the interface by default?

Question 7 of 25

8. Which of the following are the advantages of VLAN aggregation? (Multiple Choice)

Realize the isolation of broadcast domains between Sub-VLANs

Reduce the waste of IP addresses

Increase the number of available VLANs

Increase flexibility of addressing

Question 8 of 25

9. The filter policy 2000 export is configured in the IS-IS process. Which of the following is wrong about the function of this command?

If this command is not configured, the device will advertise all the routes imported by external routing protocols into IS-IS by default.

It needs to be used in conjunction with route import, which is used to advertise only part of the imported external routes to neighbors.

This command will filter the link state information released to the outside world

The routing entries generated by the device itself will be restricted from being released to the outside world

Question 9 of 25

10. In route-policy, what are the BGP attributes that can be used in the apply clause? (Multiple Choice)

AS-Path

MED

Local-Preference

Tag

Question 10 of 25

11. IS-IS supports the process and calculation of IPv6 routes by adding new TLV carrying IPv6 addresses and reachability information.

TURE

FALSE

Question 11 of 25

12. There can be multiple nodes under a route-policy. Different node numbers are identified by node. Each node can have multiple if-match and apply clauses. Which of the following descriptions are wrong? (Multiple Choice)

The relationship between if-match clauses under each node is "and"

The relationship between different nodes is "and"

The relationship between different nodes is "or"

The relationship between if-match clauses under each node is "or"

Question 12 of 25

13. The correct description of the prefix list is: (Multiple Choice)

The prefix list is used to filter IP prefixes, which can match the prefix number and prefix length at the same time

The prefix list is used to filter IP prefixes and cannot match the prefix number and prefix length at the same time

The prefix list cannot be used for packet filtering

The prefix list can be used for packet filtering

Question 13 of 25

14. What is LSA for the flooding scope of the entire autonomous system in the OSPFv3?

Intra-Area-Pre fir-LSA

AS-external-LSA

Inter Area-Prefix-LSA

Link-LSA

Question 14 of 25

15. When running OSPFv3 on a Huawei router, the OSPFv3 process will automatically select an interface address as the Router ID of the process.

TURE

FALSE

Question 15 of 25

16. The DHCPv6 server supports to provid the host with other configuration information such as the DNS server address.

TURE

FALSE

Question 16 of 25

17. In MPLS VPN, in order to distinguish IPv4 prefixes that use the same address space, the RD value is added to the IPv4 address. Which of the following description is correct? (Multiple Choice)

After the PE receives the IPv4 route from the CE, it adds RD to the IPv4 route and converts it into a globally unique VPN-IPv4 route, and publishes it on the public network

RD can be used to control the release of VPN routing information

On the PE device, each VPN instance corresponds to an RD value. On the same PE device, the RD value must be unique in the Update message

DRD is encapsulated as an extended community attribute of BGP in the transmission process

Question 17 of 25

18. Which of the following statement about the static LSP configuration in the MPLS network is wrong?

When a certain LSR is a Transit LSR, In Label and Out Label need to be configured at the same time, both in the range of 16~1023

When a certain LSR is a Transit LSR, In Label and Out label need to be configured at the same time. In Label range is 16~1023, Out Label range is 16~1048575

When a certain LSR is an Ingress LSR, only Out Label needs to be configured, the range is 16~1048575

When an LSR is an Egress LSR, only In Label needs to be configured, the range is 16~1023

Question 18 of 25

19. What kind of packets can Huawei equipment perform traffic suppression for? (Multiple Choice)

Broadcast

Known unicast

Multicast

Unknown unicast

Question 19 of 25

20. Regarding the basic forwarding process of MPL S, which of the following statement is wrong?

By default, the Egress node that supports PHP has a label value of 3 assigned to the penultimate hop node.

When an IP packet enters the MPLS domain, the MPLS border device inserts a new label between the packet's Layer 2 header and the IP header.

When the IP packet enters the MPLS domain, check whether the Tunel ID value corresponding to the destination IP address is 0x0. If the Tunel ID value is 0x0, then enter the MPLS forwarding process.

The transmitting node device will replace the existing label on the top of the stack (the outermost label) with the label allocated by the next hop device.

Question 20 of 25

21. Network managers can use CAR technology in traffic monitoring.
Which of the following technologies can be applied in CAR? (Multiple Choice)

Double-barrel double-speed

Double-barrel single-speed

Single-barrel single-speed

Three-barrel single-speed

Question 21 of 25

22. Which of the following types of routes is used for advertising external routes in BGP EVPN?

Type1

Type2

Type3

Type4

Type5

Question 22 of 25

23. There is a new HW office that needs to use their router as a DHCP server.
When configuring the DHCP server to provide DHCP services for the current office, which of the following items need to be configured? (Multiple Choice)

Exclude unused IP addresses from the DHCP server

Configure the timeout period of ping packets

Configure the startup file of the DHCP server

Configure manual binding

Configure DHCP address pool

Question 23 of 25

24. A routing tool can define multiple entries.
Which tool will automatically add a deny-any entry at the end of the configuration? (Multiple Choice)

Route policy

Community-tilter

IP-prefix

AS-path-filter

Question 24 of 25

25. Which of the following statements about inter-domain MPLS VPN is wrong? (Multiple Choice)

When only LDP is used for the public network label, for the cross-domain VPN-optionC scheme 2, Layer 3 labels are required in the packet forwarding process.

For the cross-domain VPN-OptionB method, an MP-eBGP neighbor relationship needs to be established between the two ASBRs.

For the cross-domain VPN-OptionA method, the route passed between the two ASBRs is a common IPv4 route.

For cross-domain VPN-OptionB, multiple interfaces (including sub-interfaces) are interconnected between two ASBR-PEs, each interface is associated with a VPN, and each ASBR PE treats the opposite end as a CE.

Question 25 of 25

HCDA Test Preparations

Latest Huawei Exam Dumps | New HCIA, HCIP and HCIE Tests

Tag Archives: HCIE-Routing & Switching

Actual HCIE-Routing & Switching (Written) V3.0 H12-261_V3.0-ENU Exam Questions

Recent Posts

Tags