Huawei HCNP-WCDMA H35-421-ENU Free Online Test

If looking for new HCNP-WCDMA Certification H35-421-ENU exam questions for H35-421-ENU Huawei Certified Network Professional-WCDMA exam, please choose HCDATEST H35-421-ENU test questions now. HCDATEST has released new H35-421-ENU test questions, which will ensure you pass HCNP-WCDMA H35-421-ENU exam.

HCDATEST offers valid H35-421-ENU exam questions to ensure that you can pass H35-421-ENU exam with 100% passing guarantee. Here, we share 20 free questions as Huawei HCNP-WCDMA H35-421-ENU Free online Test, You can get 5 points after answer one question correctly. You can test these 20 free questions to feel the high quality of HCDATEST H35-421-ENU exam dumps.

Begin to Test:

1. Which of the following descriptions are correct about congestion handling? (Multiple Choice)

Batch deactivation, and then batch ACT Cell is the most commonly used means of relieving congestion.

The FMA can generate deactivation and activation scripts for any interface board, cell carried by the SPU, or all cells of the RNC.

It is recommended to initially operate on 30 NodeBs per batch.

Monitor CPU occupancy when performing activation to adjust the number of cells in the subsequent batch and the execution interval

Question 1 of 20

2. Regardless of the service, the final rate of SPSP (spread spectrum) is 3.84Mcp.

True

False

Question 2 of 20

3. What are the correct statements? (Multiple Choice)

Replacing the standby SCUa board reduces the internal switching capacity of the system and has no impact on the service.

If the standby board is not in place, change the SCUa board in the MPS plug-in frame will cause all single board in this frame reset, and all the businesses in this frame will be interrupted.

If the standby board is not in place, change the SCUa board in the EPS plug-in frame will cause all single board in this frame reset, and all the businesses in this frame will be interrupted; meanwhile, it will cuase the communication between the EPS plug-in frame and the MPS plug-in frame is interrupted, which then lead to cross-frame of MPS plug-in frame interrupt.

Question 3 of 20

4. M2000 threshold alarm can help the maintenance personnel of the operator to detect the abnormality of the RNC in a timely manner. It is recommended to set the critical KPI threshold alarm for all RNCs on the existing networks.

True

False

Question 4 of 20

5. About the spare parts of the controller, which statement is wrong?

A board that does not have a primary backup configuration will directly affect the related business when failes, so this kind of board spare part has a high priority on the board.

The board configured in the resource pool mode will not cause system-related service interruptions in the event of a fault, and will only reduce the performance of the system. Therefore, the priority of such boards is low.

The false panel is used to close the cabinet to form a good cooling air duct, while ensuring the electromagnetic shielding integrity and appearance of the cabinet. Therefore, the priority of the spare parts is medium.

If the board is configured with the primary backup, the board will be automatically switched to the active one when fails. This will not affect the normal operation of the system. Therefore, the priority of the boards is low.

Question 5 of 20

6. Which of the following statement about software management expert is wrong?

If you want to use a software management expert to upgrade, you must have software management expert project management authority.

The software management expert needs to call the upgrade risk check package. Since the risk check package may be refreshed after the release of the version, please go to the Support website version supporting data directory to obtain the risk check package before each use.

The upgrade flowchart and instruction manual of the network element have been embedded in the interface of the software management expert, and online upgrade help can be obtained.

When creating an upgrade task, you need to select the following upgrade steps in the step settings bar: the execution mode of each step is set to "automatic execution".

Question 6 of 20

7. The DIP switch of the BSC6900 plug-in frame is located at the bottom of the back of the frame. Which of the following descriptions about bit 8 is correct?

The meaning of setting to 0 or 1 is the same.

Set to 0 for strong dependency loading, and 1 for weak dependency loading

If the BSC6900 is set to 1, the SCUa board is self-starting.

If the BSC6900 is set to 0, the SCUa board is self-starting.

Question 7 of 20

8. In the BTS3900, the WMPT board provides different physical port types for the Iub interface, including FE and 8-route E1T1.

True

False

Question 8 of 20

9. What information should you know and feedback when you encounter an accident at the scene? (Multiple Choice)

Fault phenomenon

Product information (whether multiple products)

Occurrence time

Background information before the occurrence, such as whether major network operations are in progress

Scope of influence

Question 9 of 20

10. One WRFU module can support 2 carrier or 4 carrier output.

True

False

Question 10 of 20

11. To improve the quality of the project and avoid the problem of intermodulation, what should be paid attention to during construction?

For jumper making, there are four actions, they are expose the outer conductor, align, hand tighten, the upper wrench tighten

When making joints, if it is raining, immediately make preliminary waterproof measures.

Try to use fixed length jumpers

After the rain stops, it is necessary to dry the inner and outer conductors of the joints to avoid water, moisture, debris, etc.

Question 11 of 20

12. Setting the working mode of E1/T1 to adjust the DIP switch is no better than to adjust it by the “SET E1T1” command of LMT.

True

False

Question 12 of 20

13. Which is the preamble of Cch, 4, 3?

1,-1,-1,1

1,-1,1,-1

1,1

1,-1

Question 13 of 20

14. What is the method for performing MTU detection on the NodeB side?

PING

TRACERT

TELNET

Question 14 of 20

15. The inspection SOP report summary is provided by 5ummary Report feature of Mini-OMStar.

True

False

Question 15 of 20

16. One frame can configure more than one MPU subsystems.

True

False

Question 16 of 20

17. Which IP address can be used by NodeB local maintenance terminal?

192.168.0.10/24

192.168.1.1/24

17.21.2.15/24

17.21.2.111/24

Question 17 of 20

18. 16QAM is a high-order modulation method that uses phase and amplitude together to represent bit information. Each point is represented by 4 bits, and amplitude plus phase is used to represent a digital signal.

True

False

Question 18 of 20

19. Which of the following boards provide clock recovery from the line? (Multiple Choice)

AEUa

AOUa

POUc

UOIc

Question 19 of 20

20. Which ports must be opened between the PC and OMU that deploy the incident information collection tool?

6000

Question 20 of 20

Above are Huawei HCNP-WCDMA H35-421-ENU Free online Test, which are just part of HCDATEST H35-421-ENU full version. If you want to purchase full version of H35-421-ENU exam questions, please click the picture shown as below. Just leave your message here or contact us via email [email protected] if you have any questions. 100% pass guaranteed!

admin Posted in H35-421-ENU, HCNP-WCDMA H35-421, H35-421-ENU, H35-421-ENU exam dumps, H35-421-ENU latest dumps, H35-421-ENU questions and answers, H35-421-ENU real exam questions, H35-421-ENU real questions, H35-421-ENU test prep, H35-421-ENU training materials, Huawei Certified Network Professional-WCDMA, Huawei HCNP-WCDMA H35-421-ENU Free Online Test Leave a comment

HCDA Test Preparations

Latest Huawei Exam Dumps | New HCIA, HCIP and HCIE Tests

Tag Archives: H35-421-ENU test prep

Huawei HCNP-WCDMA H35-421-ENU Free Online Test

Recent Posts

Tags