Valid H35-310-ENU HCNA-Mobile Soft Switch Exam Questions

Planning for H35-310-ENU Huawei Certified Network Associate-Mobile Soft Switch exam? Valid H35-310-ENU HCNA-Mobile Soft Switch Exam Questions have been released on December 11, 2018, which contain real H35-310-ENU exam questions with accurate answers to ensure your success in Huawei H35-310-ENU Exam.

Try H35-310-ENU free questions

Please try H35-310-ENU free questions to test the high quality of Valid H35-310-ENU HCNA-Mobile Soft Switch Exam Questions now. There are 20 free questions of the full H35-310-ENU exam questions. After you check all Huawei H35-310-ENU free questions, you will find you want to get the full version of HCNA-Mobile Soft Switch H35-310-ENU exam.

Begin to Test:

1. Which one is the board that can provide the Mc physical interface of in the case of IP centralized forwarding?

MOMU

MMPU

MPPU

MNET

Question 1 of 20

2. Whether the MSOFTX3000 device is CPCI or ATCA can be seen through the version. V100 is CPCI and V200 is ATCA.

A. TRUE

B. FALSE

Question 2 of 20

3. SIWC does not support ATM bearers. It does not provide STM-1 optical interfaces and cannot be used for future service expansion.

TRUE

FALSE

Question 3 of 20

4. What are the functions of the ATM layer in the ATM protocol reference model? (Multiple Choice)

General flow control

Cell header generation and extraction

Cell VPI/VCI translation

Cell multiplexing and demultiplexing

Question 4 of 20

5. Which of the following statements are incorrect in the UMG8900 version upgrade process? (Multiple Choice)

After the upgrade fails, the system does not need to reset the system after the version is rolled back.

To ensure that the upload software is normal, the firewall should be turned off on the P

An OMU board is faulty or not in place, selecting the OMU dual configuration does not affect the upgrade.

If the alarm mask is deleted before the upgrade, use the “SET ALMSHLD” to add the mask set before the upgrade again.

Question 5 of 20

6. How many thousands of users can be maximum supported by the MSC ATCA platform when it is end office fully configured?

300

500

1000

1200

Question 6 of 20

7. When the UMG8900 performs MTP3-M3UA commissioning, which of the following statements are correct? (Multiple Choice)

If the link status of the M3UA is "not established", the establishment of the SCTP link that carries the M3UA is unsuccessful.

Execute LST M3UALNK to check whether the local IP address, local SCTP port number, remote IP address, and remote SCTP port number of the M3UA link match the MGC side. At the same time, it is confirmed that the working mode of the M3UA link on the UMG8900 side is "client", and the working mode of the M3UA link on the MOSFX3000 side is "server".

Execute LST SCTPINIT to view the SCTP protocol parameters of the M3UA, it is mainly to check that UMG8900 side use the same check algorithm as MGC side(the same as CRC32 or ADLER32). The check algorithm must be consistent at both ends. Otherwise, the SCTP link is unsuccessful.

After modifying the SCTP parameters, be sure to restart the SPF board to make the modified parameters take effect.

Question 7 of 20

8. In the location update process, when configuring MSC and HLR data, what GT data needs to be configured in the SCCPGT table? (Multiple Choice)

Local bureau MSC segment GT

IMSIGT translation result segment

HLR number segment

MSISDN number segment

Question 8 of 20

9. Which of the following types of SCCPGT translation results are included?

SPC+OLD GT

SPC+SSN

SPC+NEW GT

SPC

Question 9 of 20

10. What are the correct descriptions of the GCU201 module group (process group)? (Multiple Choice)

Each of the IFM processes in the GCU201 can be all alone configured in load balancing mode or active/standby mode.

The two IFM processes in the GCU201 are all configured in load balancing mode or fully configured in active/standby mode.

Question 10 of 20

11. What kind of categories can CFB be subdivided into when call forward busy? (Multiple Choice)

The network decides call forward busy

Paging is not responding

Wireless channel assignment failed

The user decides call forward busy

Question 11 of 20

12. Regarding the default path of the BAM file, which of the following is incorrect?

The folder path of the BAM program is "D:MSOFTX3000"

The folder path of the traffic statistic is "D:Stats"

The storage directory of the host module loading data is "D:MSOFTX3000Data"

The data file path of the database: "D:MSSQLData"

Question 12 of 20

13. ATCA platform, what are the system-defined module groups? (Multiple Choice)

GCU100

GCU101

GCU200

VCU100

Question 13 of 20

14. Currently, the MSC and the VLR are all in one network, so the MSC number and the VLR number are basically the same.

TRUE

FALSE

Question 14 of 20

15. What are the classifications for switching? (Multiple Choice)

Switching between cells in the same base station

Switching between different base stations within the BSC

Switching between base stations in the MSC

Switching between different MSCs with PLMN

Question 15 of 20

16. Which of the following descriptions for BAM management principles are correct? (Multiple Choice)

The data modification performed by the operator through the maintenance terminal is first stored in the SQL database. The data format in the SQL cannot be directly loaded by the board.

When the FMT switch is turned on, BAM will automatically format the data in SQL and save it in the D:DATA directory.

In the case of online (LON), BAM sends the data configuration to memory

The board reads the software load switch (MOD LSS) and finds that the data can be written, and the program/data is written to the FLAS

Question 16 of 20

17. What are the correct descriptions of ATM signaling? (Multiple Choice)

Establish, maintain, and release VCC

Allocating network resources for VCC connections

Support point-to-point communication and point-to-multipoint communication

Support symmetric and asymmetric calls

Question 17 of 20

18. What advantages does the MOSTX3000 use OSTA2.0 platform over the OSTA1.0 platform? (Multiple Choice)

The system has strong expansion capabilities, providing greater bandwidth, higher integration, and richer service interfaces.

Double star bus and distributed supply, with higher reliability;

Real development standards, lower life cycle costs.

More energy efficient, larger capacity and better performance.

Question 18 of 20

19. Which forwarding processes are involved in the forward trigger analysis in the HLR network element? (Multiple Choice)

CFU

CFB

CFNRc

CFNRy

Question 19 of 20

20. If A to B have a direct route through link set 1 and a loop route through link set 2;

Which of the following statements about routing priority configuration is correct? (Multiple Choice)

If the two signaling routes configured have the same priority, the signaling message is sent in load sharing mode on link set 1 and link set 2.

If the direct route priority is set to 0 and the priority of the loop route is 1, the signaling message is sent preferentially on link set 1. When link set 1 is unavailable, it is sent on link set 2, that is, direct route amd loop route work on the active/standby mode

Question 20 of 20

Get H35-310-ENU Full Version

After read all H35-310-ENU free questions, please go on for the full version of Valid H35-310-ENU HCNA-Mobile Soft Switch Exam Questions. HCDAtest offers 288 real exam questions and answers as a full to help you pass HCNA-Mobile Soft Switch exam.

Valid H35-310-ENU HCNA-Mobile Soft Switch Exam Questions from HCDAtest are the best materials for Huawei H35-310-ENU exam. Any Questions, please contact me freely: [email protected].

Release: HCNA Mobile Soft Switch H35-310 actual exam

Hello Guys, we released new exam today: HCNA Mobile Soft Switch H35-310 actual exam. There are 288 questions in our latest H35-310 exam dumps. All your actual questions will be randomly chosen from our dumps.

We can guarantee you can 100% pass your exam after studying your dumps. We specially provide English version to meet customers need. If you want to see the demo questions please contact us at email [email protected]

admin Posted in H35-310-ENU, HCNA H35-310-ENU, H35-310-ENU actual questions, H35-310-ENU exam dumps, H35-310-ENU practice test, H35-310-ENU questions and answers, HCNA Mobile Soft Switch Leave a comment

HCDA Test Preparations

Latest Huawei Exam Dumps | New HCIA, HCIP and HCIE Tests

Tag Archives: H35-310-ENU

Valid H35-310-ENU HCNA-Mobile Soft Switch Exam Questions

Try H35-310-ENU free questions

Get H35-310-ENU Full Version

Release: HCNA Mobile Soft Switch H35-310 actual exam

Recent Posts

Tags