New H12-831_V1.0-ENU Exam Questions – Check H12-831_V1.0-ENU Free Online Test

To earn HCIP-Datacom-Advanced Routing & Switching Technology certification, candidates are required to pass two exams as listed:

H12-821_V1.0-ENU HCIP-Datacom-Core Technology V1.0
H12-831_V1.0-ENU HCIP-Datacom-Advanced Routing & Switching Technology V1.0

Today, we have released new H12-831_V1.0-ENU exam questions to help you pass the requirement in the first attempt, then you can achieve the HCIP-Datacom-Advanced Routing & Switching Technology certification successfully.

New H12-831_V1.0-ENU exam questions are based on the new exam outlines and knowledge points. All the practice exam questions with the precise answers are great to ensure your success in actual H12-831_V1.0-ENU HCIP-Datacom-Advanced Routing & Switching Technology V1.0 exam. You can check H12-831_V1.0-ENU free online test below before getting the new H12-831_V1.0-ENU exam questions. Any other questions, you can contact us freely: [email protected].

Begin to Test:

1. The OSPF protocol runs between CE and PE, when CE1 advertises the route of the site to CE2. Which of the following description is wrong?

When PE2 receives a BGP route from PE1 that carries a different Domain ID from the local one, it is correct for all LSAs, and PE2 will generate Type5 LSA or Type7 LSA

When PE2 receives the same Domain ID as the local BGP route sent by PE1, PE2 will generate Type3 LSA for Type1 LSA and Type2 LSA

When PE2 receives the same Domain ID as the local BGP route sent by PE1, for Type3 LSA, PE2 will generate Type5 LSA

The Domain ID configured by PE1 can be used as an extended community attribute of BGP and sent along with the route to PE2.

Question 1 of 25

2. By default, which of the following secure MAC address types will be lost after the device restarts?

Black hole MAC address

Sticky MAC address

Secure dynamic MAC address

Secure static MAC address

Question 2 of 25

3. Regarding MP-BGP, whici of the following description is incorrect?

When the PE and CE exchange routes through BGP, you need to create a BGP process for each VPN instance on the CE

MP-BGP's message type and VPNv4 routing policy are the same as BGP-4

MP-BGP needs to assign private network labels to VPNv4 routes

MP-BGP advertises VPNv4 routes through two attributes: MP_REACH_NLRI and MP_UREACH_NLRI

Question 3 of 25

4. In the LDP session establishment process, the active party will first send the lnitialization information for parameter negotiation, and if the passive party does not accept the negotiation parameters, it will send _____ .

Keepalive Message

Initialization Message

Hello Message

Error Notification Message

Question 4 of 25

5. What is the command to adjust the link cost value of an IS-IS interface?

isis cost

isis timer hello

isis circuit-level

isis circuit-type

Question 5 of 25

6. What is the purpose of configuring LSP fragmentation for IS-IS equipment?

Make the device unable to establish IS-IS neighbors

Allow the device to support more IS-IS routing entries

Make the device unable to learn IS-IS routing information

No practical purpose

Question 6 of 25

7. A router LSA is shown in the figure. Which of the following statement is wrong?

The Router ID of this router is 10.0.12.1

This router is DR

The router has established adjacency

This router supports the import of external routes

Question 7 of 25

8. Regarding the cause of the dual-master failure of the VRRP backup group, which of the following is the most unlikely?

The link that transmits the VRRP notification message is faulty

The low-priority VRRP backup group discards the received VRRP notification packets as illegal packets

The VRRP backup group IDs on both ends are different

Master device sends 1 notification message per second

Question 8 of 25

9. Regarding the cause of the dual-master failure of the VRRP backup group, which of the following is the most unlikely?

The link that transmits the VRRP notification message is faulty

The low-priority VRRP backup group discards the received VRRP notification packets as illegal packets

The VRRP backup group IDs on both ends are different

Master device sends 1 notification message per second

Question 9 of 25

10. During the process of viewing the debug output through the SSH terminal, a lot of information pops up. Which of the following operations can make the Moni tor terminal no longer pop up the debug message?

Exit the current Moni tor interface, log in to the device again using SSH to open the new Monitor interface

Open the notepad, enter undo debugging all, copy the command line, and paste it into the Monitor interface

Open the notepad, enter undo terminal monitor, copy the command line, and paste it into the monitor interface

Open the notepad, enter undo terminal debugging, copy the command line, and paste it into the Monitor interface

Question 10 of 25

11. R1 executes the operation ping -a 10.1.1.1 10.5.16.2, what does this command mean?

The source IP address of the ping packet is any directly connected port address of R1

The source IFP address of the ping packet is the outgoing interface address of the optimal IP route that R1 points to 10.5.16.2, and is not 10.1.1.1

The source IP address of the ping packet is 10.1.1.1

The destination IP address of the ping packet is 10.1.1.1 and 10.5.16.2

Question 11 of 25

12. In the intra-domain MPLS VPN network, when the data packet enters the public network and is forwarded, it will be encapsulated with two layers of MPLS labels. Regarding the description of the two layers of labels, which of the following options is wrong?

The outer label of MPLS VPN is allocated by the LDP protocol or statically, and the inner label is allocated by the MP-BGP neighbor at the correct end.

The outer label of MPLS VPNE is called the private network label, and the inner label is called the public network label.

By default, the outer label is singled out before the packet is forwarded to the last hop device

The outer label is used to correctly send the data packet to the corresponding VPN on the PE device

Question 12 of 25

13. Regarding the role of ping and tracert, which of the following statements is correct?

Ping detects the two-way reachability between the correct end and the one-way icmp echo request packet

Tracert must be able to trace every hop IP address from source to destination

Ping verifies the reachability from the local end to the opposite end, it does not mean that the opposite end is reachable from the local end

Tracert has the same function as ping, but the name is different

Question 13 of 25

14. Which of the following is not part of the preliminary preparations for the cutover plan?

On-site defense

Cutover target

Introduction to the current network

Risk assessment

Question 14 of 25

15. In an intra-domain MPLS VPN network, when a data packet enters the public network and is forwarded, it will be encapsulated with two layers of MPLS labels. Which of the following description is wrong about the two layers of labels? (Multiple choice)

The outer label of MPLS VPN is allocated by the LDP protocol or statically, and the inner label is allocated by the MP-BGP neighbor at the correct end.

By default, the outer label is ejected before the packet is forwarded to the last-hop device

The outer label of MPLS VPN is called the private network label. The inner label is called the public network label.

The outer label is used to correctly send the data packet to the corresponding VPN on the PE device

Question 15 of 25

16. In an MPLS VPN network, data packets are forwarded when they enter the public network. Will be encapsulated with two layers of MPLS labels.
Which of the following descriptions are correct about the processing of the data packet? (Multiple choice)

The packet is forwarded to the Egress PE device after the outer label pops up on the penultimate hop device

The Egress PE device correctly sends the data packet to the corresponding VPN according to the inner label

The outer label of the packet received by the penultimate hop device is 3

The Egress PE device receives untagged IP packets

Question 16 of 25

17. After the cutover is completed, which items generally need to be checked? (Multiple choice)

Software version

Physical topology

Data flow

Control plane entries

Question 17 of 25

18. What are the work that needs to be performed in the closing phase after the cutover acceptance is completed? (Multiple choice)

Transition training

Data transfer

Acceptance summary

On-site defense

Question 18 of 25

19. The RR rules for advertising routes break the IBGP split horizon rules, so it may cause loops in the AS. What routing attributes does RR use to prevent loops? (Multiple choice)

Cluster List

Originator ID

Next hop

AS-PATH

Question 19 of 25

20. EGP authentication can prevent illegal routers from establishing neighbors with BCP routers. BCP authentication can be divided into MD5 authentication and Keychain authentication. Which of the following BGP messages will carry BCGP Keychain authentication information? ((Multiple choice)

Open

Update

Notification

Keepalive

Question 20 of 25

21. Which statements are wrong about OSPF Router LSA and Network LSA? (Multiple choice)

The router running DSPF must generate Network LSA

Routers running OSPF must generate Router LSA

There must be both Router LSA and Network LSA in the OSPF network

Network LSA carries both topology and routing information

Question 21 of 25

22. Which of the following statements about 1S-IS (IPv6) is correct? (Multiple choice)

To support the processing and calculation of IPv6 routing, IS-IS added NLPID to 129 TLV

IS-IS working at the data link layer only needs to add a new TLV to support Pv6

To support the processing and calculation of IPv6 routes, IS-IS has added TLV232236

By default, IS-IS enables the multi-topology feature

Question 22 of 25

23. In an MPLS VPN network, data packets are forwarded when they enter the public network. Will be encapsulated with two layers of MPLS labels. Which of the following description is correct about the processing of the data packet? (Multiple choice)

The packet is forwarded to the Egress PE device after the outer label pops up on the penultimate hop device

The Egress PE device correctly sends the data packet to the corresponding VPN according to the inner label

The outer label of the packet received by the penultimate hop device is 3

The Egress PE device receives untagged IP packets

Question 23 of 25

24. After the cutover is completed, which items generally need to be checked? (Multiple choice)

Software version

Physical topology

Data flow

Control plane entries

Question 24 of 25

25. Which of the following statements about the OSPFv3 message format is correct? (Multiple choice)

Hello message no longer contains address information and Interface ID

OSPF version number changed from 2 to 3

Removed Authentication and Auth Type fields

There is no change in the option field of the Hello message

Question 25 of 25

HCDA Test Preparations

Latest Huawei Exam Dumps | New HCIA, HCIP and HCIE Tests

New H12-831_V1.0-ENU Exam Questions – Check H12-831_V1.0-ENU Free Online Test

Leave a Reply Cancel reply

Recent Posts

Tags