Know the Changes to Huawei H13-211-ENU Exam & Choose Updated H13-211-ENU Exam Questions

Two changes to the Huawei H13-211-ENU exam today:

H13-211-ENU exam name has been changed to HCIA-Kunpeng Computing V1.0, previously known as HCIA-Intelligent Computing V1.0.
H13-211_ENU HCIA-Kunpeng Computing V1.0 will be offline on November 15, 2023.

If you are still planning to complete the H13-211-ENU exam successfully, come to HCDAtest to choose the updated exam questions for preparation. We have the updated H13-211-ENU exam questions to ensure that you can pass the exam with ease. Additionally, we have the H13-211-ENU free online test as the demo below to help you test one by one. Then you will know the quality of the H13-211-ENU updated exam questions. If you have any other questions, you can contact us via mail: [email protected].

Begin to Test:

1. When selecting a hard disk, you need to select the correct capacity based on the number of system slots and business demand capacity. Which of the following statements about hard disk capacity is correct?

NL SAS/SATA capacity is generally an integer multiple of 250G, and 10K/15K SAS hard disk capacity is generally an integer multiple of 500G.

NL SAS/SATA capacity is generally an integral multiple of 200G, and 10K/15K SAS hard disk capacity is generally an integral multiple of 300G.

NL SAS/SATA capacity is generally an integral multiple of 250G, and 10K/15K SAS hard disk capacity is generally an integral multiple of 300G

NL SAS/SATA capacity is generally an integral multiple of 200G, and 10K/15K SAS hard disk capacity is generally an integral multiple of 1T

Question 1 of 33

2. Which of the following one with a total number of PIN pins of 64 is PCle-?

16x

Question 2 of 33

3. Which of the following is wrong about RAID10?

The first level is a RAID1 mirror pair, and the second level is RAID0.

The hard disk utilization rate of RAID10 is 50%

RAID10 is a RAID level that combines mirroring and striping.

The read and write performance of RAID10 is consistent

Question 3 of 33

4. CPU frequencies include main frequency, FSB, bus frequency and multiplier. Which of the following statements about frequency multiplier is wrong?

The usual overclocking operation of PC is to adjust the multiplier for CPUs that do not lock the multiplier. The overclocking method of adjusting the multiplier is much more stable than adjusting the external frequency.

The data transmission speed between the CPU and the system is limited. Blindly pursuing a high main frequency and obtaining a high frequency multiplier will cause an obvious "bottleneck" effect.

Under the same FSB, the higher the frequency multiplier, the higher the CPU frequency, which is not limited.

The multiplication factor refers to the relative ratio between the CPU main frequency and the FSB.

Question 4 of 33

5. iBMC provides a wealth of connections, including which of the following? (Multiple choices)

IPMI integrated interface

Redfish integrated interface

SNMP integrated interface

User interface for web interface

Question 5 of 33

6. Which of the following descriptions of the BIOS operating process is correct?

Power on -> Hardware initialization -> CPU loads BIOS -> Load boot items -> POST boot hardware self-test -> Process system commands

Power on - >Hardware initialization- > CPU loads BIOS->POST boot hardware self-test- > Load boot items- > Process system commands

Power on -> CPU loads BIOS -> Hardware initialization loads boot items -> POST boot hardware self-test -> Process system commands

Power on->CPU loads BIOS->Hardware initialization->POST boot hardware self-test->Load boot items- > Process system commands

Question 6 of 33

7. Memory is one of the important components in the computer. Which statement about the definition of memory is wrong?

Memory is relative to external memory, and its main feature is fast access speed.

Memory is also called internal memory. Its function is to back up, copy and permanently store the calculation data in the CPU to improve the reliability of the data.

Memory, also called main memory, is a storage space that can be directly addressed by the CPU and is made of semiconductor devices.

When the computer is running, the CPU will transfer the data that needs to be calculated into the memory for calculation. When the calculation is completed, the CPU will send the results out. The operation of the memory also determines the stable operation of the computer.

Question 7 of 33

8. What is customer-oriented logical layer software, such as ERP, CRM, HR, etc?

Application software

Database software

Business application layer software

Middleware

Question 8 of 33

9. Intelligent Platform Management Interface (IPMI) is an open standard hardware management interface specification that defines which of the following specific method for management subsystems to communicate?

Combined

Embedded

Tile style

Connected

Question 9 of 33

10. Which of the following does not belong to the functional characteristics of iBMC?

Managing hardware virtualization capabilities

Fault diagnosis and management

Virtual KVN and virtual media

Rich management interface

Question 10 of 33

11. Early hard disks were connected to IDE, SCSI, etc. With the development of hard disk technology, these connection types have disappeared. The current mainstream hard disks use SATA, SAS, PCIE, etc. Which of the following statements about SAS and SATA is correct?

In terms of the physical layer, SAS connections and SATA connections are compatible with each other. SATA hard drives can be used directly in a SAS environment, and SAS can also be used in a SATA environment.

At present, most mobile hard drives for home use are SAS connected, while SATA connected is for enterprise-level applications.

SAS is a new generation of SCSI technology that uses parallel technology to obtain higher transmission speeds and improves internal space by shortening the connection lines.

SAS can meet high-performance, high-reliability applications, while SATA can meet large-capacity, non-critical business applications.

Question 11 of 33

12. Engineer A wants to check the capacity, voltage, rate, etc. of memory operation. Which of the following methods can be used to achieve this? (Multiple choices)

Save the system string through the SOL function (use the pmi tool tool under Windows, configure the BMC IP and BMC password, connect to the server BMC network, and save the string log), search for "DDR 3-" or "DDR 4-"

Query through dmicode -t memory under Linux

View basic information through BIOS

Question 12 of 33

13. Which of the following comparisons about UDIMM, RDIMM and LRDIMM is correct? (Multiple choices)

Compared with RDIMM, LRDIMM reduces the load and power consumption of the memory bus and provides the maximum supported capacity of the memory.

UDIHM needs to ensure that the transmission distance between the CPU and each memory particle is equal, so that parallel transmission is effective, and this requires a higher manufacturing process, so UDIMM has lower capacity and frequency.

UDIMM, a non-ramped dual in-line memory module, the address and control signals directly reach the DRAM chip on the DIMM without going through the buffer, so it is cheap

0 RDIMM supports Buffered mode and high-performance Registered mode, which is more stable than UDIMM and supports the highest capacity of server memory.

Question 13 of 33

14. Which of the following does not belong to server virtualization software?

Fusion Compute

Xen Server

Fusion Access

VMware ESXI

Question 14 of 33

15. CPU main frequency is also called clock frequency. The unit is megahertz (MHz) or gigahertz (GHz2). Which of the following is the function?

Used to indicate the speed of CPU operations and data processing

Determine the bus data transmission speed

Determines the running speed of the entire motherboard

Determine the speed of data exchange between CPU and memory

Question 15 of 33

16. The mark of the base memory module shows the word "PC3L". What does "L" in "PC3L" mean?

The memory module type is UDIMM

Its rated power is 30W

Its rated voltage is 1.35V

The bit width of its memory particles is 64*3bit

Question 16 of 33

17. Operating System (OS for short) is a computer program that manages and controls computer hardware and software resources . Which of the following are its core functions? (Multiple choices)

Driver management

File system management

Program management

System call reception

Question 17 of 33

18. What is a series of equipment developed by Huawei for artificial intelligence application computing platform?

KunLun series

Atlas series

E9000 series

TalShan series

Question 18 of 33

19. The three types of operating systems divided by application fields are () server operating systems and (). Server operating systems refer to operating systems installed on large computers, such as Web servers, application servers, database servers, etc. (Multiple choice)

Open source operating system

Embedded operating system

Desktop operating system

Smart card operating system

Question 19 of 33

20. Software is a series of computer data and instructions organized in a specific order. Which of the following statements about software is incorrect?

Middleware is software that provides connections between system software and application software.

System software is responsible for managing various independent hardware in the computer system, providing a platform for running application software, and adapting to different application software.

Application software is software developed for a specific purpose

Computer software is divided into system software, application software and middleware in between.

Question 20 of 33

21. Which of the following processor types belongs to the RISC instruction set architecture? (Multiple choices)

ARM

MIPS

PowerPC

X86

Question 21 of 33

22. Which of the following statements about chips is incorrect?

Chips are usually made of semiconductors

The semiconductor components commonly used in current chips are diodes.

The current chip manufacturing process is nanoscale

The essence of a chip is an integrated circuit

Question 22 of 33

23. Which of the following is not a reason for the rise of edge computing?

Ensure data reliability when the network is disconnected

Achieve on-demand and on-demand use of IT resources

Considering data privacy, some applications do not want to transmit data to the cloud.

Industrial applications have high latency requirements

Question 23 of 33

24. Which of the following statements about specialized computing is incorrect?

Dedicated computing platforms mainly refer to mainframes and minicomputers

Dedicated computing platform with multi-purpose RISC architecture

Dedicated computing platforms are expensive and have few applications. Only a few enterprises and a small number of applications can use computers.

Huawei’s KunLun minicomputer belongs to a closed computing architecture

Question 24 of 33

25. Hardware resource pooling is the future evolution trend of server hardware. Which of the following is not its advantage?

Decoupling of assets and games

A single system operates independently and efficiently

Dynamic allocation of resources

Implement intelligent scheduling and optimization

Question 25 of 33

26. Which of the following micro-architectures were launched in the year of Intel TickTock (Pendulum Mode) architecture? (Multiple choices)

Nehalem

Cascade Lake

Haswell

Sandy Bridge

Question 26 of 33

27. Which of the following chips is a semi-custom chip that not only solves the shortcomings of customized circuits, but also overcomes the shortcomings of the limited number of gate circuits of original programmable devices?

FPGA

CPU

GPU

ASIC

Question 27 of 33

28. Which of the following chips does not belong to the chip type in the evolution of FPGA?

CPLD

PROM

ASIC

PAL

Question 28 of 33

29. ARM microprocessors have spread throughout various product markets such as industrial control, consumer electronics, communication systems, network systems, wireless systems, etc. Which of the following is incorrect about the characteristics of the ARM architecture?

Supports multiple instruction sets of 16-bit, 32-bit, and 64-bit, and is well compatible with various application scenarios from IOT, terminals to clouds

Adopt complex instruction set and high processing efficiency

Extensive use of registers, most data operations are completed in registers, and instructions are executed faster

The same functions and performance occupy a small chip area, low power consumption, and higher integration. More hardware CPU cores have better concurrent performance.

Question 29 of 33

30. Which of the following is not a typical application scenario of GPU?

General computing, complete complex logical operations

Video image processing scenario

HPC hybrid application high throughput scenario

HPC high-performance acceleration scenario

Question 30 of 33

31. The following is Engineer A’s understanding of CPU, which one is correct? (Multiple choices)

The CPU has strong management capabilities and is good at management and scheduling, such as data reading, file management, etc.

Compared with GPU, CPU is parallel during data processing, so it is suitable for processing large-scale data operations.

CPU is the computing core and control core of a computer

Compared with other chips, the CPU has the strongest computing power and the largest number of core processing

Question 31 of 33

32. Which component does not belong to a common computing unit?

CPU

ASIC

NPU

GPU

FPGA

Question 32 of 33

33. Which of the following statements about servers running outside the cluster is incorrect?

Monitor the health of the cluster

Clients on these servers are cluster nodes that require cluster awareness

Can act as a license server for applications running inside the cluster

Serves as a central user account database

Question 33 of 33

HCDA Test Preparations

Latest Huawei Exam Dumps | New HCIA, HCIP and HCIE Tests

Know the Changes to Huawei H13-211-ENU Exam & Choose Updated H13-211-ENU Exam Questions

Leave a Reply Cancel reply

Recent Posts

Tags