[Demo Questions] HCNP-R&S-IEEP H12-223-ENU (V10.02 160Q Version)

Based on new Huawei HCNP-R&S certification H12-223 exam objectives, we have updated new Huawei HCNP-R&S Certification H12-223-ENU exam questions on Jan.18, 2018. The current H12-223-ENU exam questions contains 160 real exam questions and answers, which ensure you pass Huawei H12-223-ENU HCNP-R&S-IEEP(Huawei Certified Network Professional-R&S-IEEP) exam with 100% passing guarantee.

We will provide 20 questions for this HCNP-R&S-IEEP H12-223-ENU Certification exam. You can get 5 points after answer one question correctly. All the questions we provide are the latest exam subjects. They are just part of the full version 160 questions. And all your HCNP-R&S-IEEP H12-223-ENU real questions will be randomly chosen from our dumps. If you want to purchase the full version 160 questions please go to our Shop page or click “I want to buy full version“. Just leave your message here or contact us via email [email protected] if you have any questions. 100% pass guaranteed!

Start to test:

1. During the structured network troubleshooting process, which of the following items require attention in the information collection phase? (Multiple Choice)

What information to collect

How to collect information

Whether authorization is required

Risks in the information collection phase

Question 1 of 20

2. Which of the following are migration difficulties? (Multiple Choice)

Minimizing on services

Achieving optimal risk prevention

Formulating a complete migration solution

Carrying out the migration smoothly

Question 2 of 20

3. On a campus network, the gateway is usually configured on the aggregation layer.
What advantages does this design have compared with configuring the gateway on the access layer? (Multiple Choice)

Reduce the broadcast domain on the network and the probability of broadcast storms.

Achieve separate convergence of Layer 2 and Layer 3 to increase the convergence speed and network stability.

Properly design the Layer 2 network scale, reduce network segment allocation, and improve network management efficiency,

Allow configuring access devices as Layer 2 devices, reducing network construction costs.

Leverage the STP and VRRP mechanisms to improve network reliability.

Question 3 of 20

4. Which of the following statements regarding the basic device information check is true?

You can run the display patch-information command to check patch information.

The device time should be consistent with the actual time (time difference ≤ 24 hours) so that a fault can be accurately located based on the occurrence time.

The debugging functions can be enabled when the device is running properly.

You can run the display current-configuration command to check the PCB version and the software version of a card.

Question 4 of 20

5. Which of the following WAN links are used on a packet switched network? (Multiple Choice)

ATM

ISDN

MSTP

PSTN

X.25

Question 5 of 20

6. During the migration test, which of the following indicates that the test is completed?

The network is running properly.

Tested network services are running properly.

Tested upper-layer application services are running properly on the network.

Command outputs are correct.

Question 6 of 20

7. Which of the following features is not applied to enterprise WANs?

Wide coverage

Difficult O&M

Multiple types

High of utilization

Question 7 of 20

8. In a migration project, preliminary survey is used for communicating with the customer and other participants and collecting network information for analysis.

TRUE

FALSE

Question 8 of 20

9. Current enterprise networks usually use OSPF as the routing protocol.
What precautions are there when OSPF is used? (Multiple Choice)

Determine that the backbone area will not split,

Check whether secondary optimal routes exist on the network according to OSPF route selection

Check whether all non-backbone areas are correctly and reliably connected to the backbone area,

Check the OSPF network topology and ensure that no loop exists when OSPF routes are being calculated.

Verify that OSPF costs can correctly demonstrate the actual bandwidth of links at more than 100 Mbit/s.

Question 9 of 20

10. On the border between an enterprise network and external network, which of the following devices is deployed at the outermost side of the enterprise network?

IDS

IPS

VPN

Question 10 of 20

11. Which of the following events represent the end of the network planning stage?

Project initiation

Bid release

Contract signing

Preliminary project acceptance

Question 11 of 20

12. The customer's project team is the end user of the network, and they are the final judge of the project.

TRUE

FALSE

Question 12 of 20

13. Determining members in the project team is one of tasks in the implementation stage.

TRUE

FALSE

Question 13 of 20

14. Which three steps does a migration include? (Multiple Choice)

Snapshot before the migration

Delivery during the migration

Check after the migration

Attendance after the migration

Question 14 of 20

15. Which of the following statements regarding IP address allocation are true? (Multiple Choice)

All IP addresses on a network must be unique except when anycast is used.

IPv4 addresses are classified into Classes A, B, and C.

The mask length of /24 can simplify network design.

Variable length subnet mask (VLSM) is often used for determining mask lengths to improve IP address efficiency.

Question 15 of 20

16. When the DHCP relay function is configured on a device, VLANIF interfaces connected to DHCP clients must be bound to a DHCP server group containing the IP address of the DHCP server.

TRUE

FALSE

Question 16 of 20

17. If a fault is located on a router that works in redundancy mode with another router, which of the following methods is the most appropriate for subsequent troubleshooting?

Configuration comparison

Bottom-up

Service traffic path check

Top-down

Question 17 of 20

18. Which of the following tasks need to be completed during the planning stage of a project? (Multiple Choice)

Work out the technical design

Know the project background

Determine the model of network devices in the project

Make clear the requirements of a project

Plan IP addresses

Question 18 of 20

19. The structured network troubleshooting process is triggered by a fault report. The basic principle is to simplify troubleshooting by narrowing down or isolating all possible causes of a fault into several small subsets.
In what sequence are structured network troubleshooting steps carried out?
1. Information collection
2. Fault identification
3. Cause list
4. Troubleshooting assessment
5. Fault analysis
6. One-by-one check
7, Fault rectification

1->2->3->6->4->5->7

1->2->3->6->5->4->7

2->1->3->5->6->4->7

2->1->5->3->4->6->7

Question 19 of 20

20. Which of the following statements regarding border security optimization are true? (Multiple Choice)

Border security optimization aims to prevent or reduce external network attacks and harm.

The optimization position is usually located at the network edge.

Optimization measures include attack defense technologies, packet filtering, and hardware firewalls.

Border security optimization aims to achieve secure user access control.

Question 20 of 20

If want to compare with old version, please visit: http://www.hcdatest.com/h12-223-enu-hcnp-rs-ienp-huawei-certified-network-professional-improving-enterprise-network-performance/

HCDA Test Preparations

Latest Huawei Exam Dumps | New HCIA, HCIP and HCIE Tests

[Demo Questions] HCNP-R&S-IEEP H12-223-ENU (V10.02 160Q Version)

One thought on “[Demo Questions] HCNP-R&S-IEEP H12-223-ENU (V10.02 160Q Version)”

Leave a Reply Cancel reply

Recent Posts

Tags